Salta al contenuto principale

Modifiche al passo #2

Modifica in base a Jessica Wehinger-

Modifica approvata da Jessica Wehinger

Eliminato
Aggiunto
Invariato

Righe Passo

[* black] In the middle of controllercontroller, locate the circular cover with the label Xbox 360.
[* black] In the middle of controllercontroller, locate the circular cover with the label Xbox 360.
[* black] Detach the 3 latches holding down the middle piece cover.
[* black] Use a metal spudger to pry open middle piece of controller and pull off middle piece to reveal three screws.
[* black] Use a metal spudger to pry open middle piece of controller and pull off middle piece to reveal three screws.
[* black] Using the T-8 Torx screwdriver with the extension #4 remove the 2.3 mm screws.