Salta al contenuto principale

Modifiche al passo #2

Modifica in base a lauren paganella-

Modifica approvata da lauren paganella

Eliminato
Aggiunto
Invariato

Righe Passo

[* black] In the middle of controller locate the circular cover with the label Xbox 360.
[* black] '''Note:'''Note: TheDetach the 3 latches holding down the middle piece cover is attached to the controller by 3 latchescover.
[* black] '''Note:'''Note: TheDetach the 3 latches holding down the middle piece cover is attached to the controller by 3 latchescover.
[* black] Use metal spudger to pry open middle piece of controller and pull off middle piece to reveal three screws.
[* black] Using the T-8 Torx screwdriver with the extension #4 remove the 2.3 mm screws.