Salta al contenuto principale

Modifiche al passo #2

Modifica in base a Mateo-

Modifica approvata da Mateo

Eliminato
Aggiunto
Invariato

Righe Passo

[* black] In the middle of controller locate the circular cover with the label Xbox 360.
[* black] '''Note:'''Note: The middle piece cover is attached to the controller by 3 latches.
[* black] Use metal spudger to pry open middle piece of controller and pull off middle piece to reveal three screws.
[* black] UnscrewUsing the three screws with T-8 andTorx screwdriver with the extension #4 remove middle, black, plastic piecethe 2.3 mm screws.
[* black] UnscrewUsing the three screws with T-8 andTorx screwdriver with the extension #4 remove middle, black, plastic piecethe 2.3 mm screws.

Immagine 2

Vecchia Versione

Nuova Versione