Salta al contenuto principale

Modifiche al passo #5

Modifica in base a lauren paganella-

Modifica approvata da lauren paganella

Eliminato
Aggiunto
Invariato

Righe Passo

[* black] ''' WARNING: '''icon_caution] This step is very difficult and may require a third hand to obtain goal.
[*

[*
black] Pull the two halves apart to detach the two latches located at the base of the handles which are holding the front and back panels together.
[* black] ''' WARNING: '''icon_caution] This step is very difficult and may require a third hand to obtain goal.
[*

[*
black] Pull the two halves apart to detach the two latches located at the base of the handles which are holding the front and back panels together.
[* black] Start with one side of the controller (left or right).
[* black] Gently slide the spatulaspudger towards the end of the handles and pry the two halves apart as you move the spatula.apart.
[* icon_note]
The white circular caps will come off by applying gentle force.
[* black] Gently slide the spatulaspudger towards the end of the handles and pry the two halves apart as you move the spatula.apart.
[* icon_note]
The white circular caps will come off by applying gentle force.
[* black] Pull the front and back panels apart ( be sure to use some elbow grease!) to separate the panels and expose the inside of the controller.