Salta al contenuto principale

Modifiche al passo #5

Modifica in base a Jessica Wehinger-

Modifica approvata da Jessica Wehinger

Eliminato
Aggiunto
Invariato

Righe Passo

[* black] ''' WARNING: ''' This step is very difficult and may require a third hand to obtain goal.
[* black] DetachPull the two halves apart to detach the two latches located at the base of the handles which are keepingholding the front and back panels together.
[* black] DetachPull the two halves apart to detach the two latches located at the base of the handles which are keepingholding the front and back panels together.
[* black] Start with one side of the controller (left or right).
[* black] Gently slide the spatula towards the end of the handles making a prying motionand pry the two halves apart as you move the spatula. WhiteThe white circular caps will come off by applying gentle force.
[* black] Pull apart back panel from the front panel with max strength and theback panels willapart ( be sure to use some elbow grease!) to separate exposingthe panels and expose the inside of the controller.
[* black] Gently slide the spatula towards the end of the handles making a prying motionand pry the two halves apart as you move the spatula. WhiteThe white circular caps will come off by applying gentle force.
[* black] Pull apart back panel from the front panel with max strength and theback panels willapart ( be sure to use some elbow grease!) to separate exposingthe panels and expose the inside of the controller.