Salta al contenuto principale

Modifiche al passo #5

Modifica in base a Mateo-

Modifica approvata da Mateo

Eliminato
Aggiunto
Invariato

Righe Passo

[* black] ''' WARNING: ''' This step is very difficult and may require a third hand to obtain goal.
[* black] Use T-8 to unscrew screw behind the eject button platform.
[* black] '''Note:''' There is two latches located at the base of the handles keeping the controller console together.
[* black] Start with one side of the controller (left or right).
[* black] Use metal spudger to pry atGently slide the crevasses between front and back panel to createspatula towards the end of the handles making a gapprying motion as you move the spatula. White circular caps will come off applying gentle force.
[* black] Use metal spudger to pry atGently slide the crevasses between front and back panel to createspatula towards the end of the handles making a gapprying motion as you move the spatula. White circular caps will come off applying gentle force.
[* black] Pull apart back panel from the front panel with max strength and the panels will separate exposing the inside of the controller.