Salta al contenuto principale

Modifiche a questo Step

Modifica in base a Alberto Carlos Perez-

Modifica approvata da Alberto Carlos Perez

Eliminato
Aggiunto
Invariato

Righe Passo

[* red] Remove the four Phillips screws securing the hard drive bracket to the upper case.
[* black] Slide the hard drive out enough to grab and disconnect the SATA cable.
[* black] Lift the hard drive out of the chassis.
[* black] Remove the two T6 Torx screws from each side of the hard drive (four screws total).
[* icon_note] You'll need to transfer the T6 Torx screws to your new hard drive if you're changing drives.