Salta al contenuto principale

Modifiche al passo #1

Modifica in base a Connor Woitte-

Modifica approvata da Connor Woitte

Eliminato
Aggiunto
Invariato

Righe Passo

[* blackred] Remove the 64x 7mm screws on the outside oftop and bottom, and the 2x 5mm screws from the shell, thenmiddle, then remove the back part of the housinghousing.
[* blackred] Remove the two hidden screws at the bottom, and the white power buttonbutton.
[* icon_note] '''Note''' There will be 6x 7 mm Phillips head screws, and 2x 5 mm Phillips head screws.
[* blackred] Remove the 64x 7mm screws on the outside oftop and bottom, and the 2x 5mm screws from the shell, thenmiddle, then remove the back part of the housinghousing.
[* blackred] Remove the two hidden screws at the bottom, and the white power buttonbutton.
[* icon_note] '''Note''' There will be 6x 7 mm Phillips head screws, and 2x 5 mm Phillips head screws.