Salta al contenuto principale

Aggiusta la tua roba

Diritto alla Riparazione

Store

Modifiche al passo #3

Modifica in base a Connor Woitte-

Modifica approvata da Connor Woitte

Prima di
Dopo il
Invariato

Righe Passo

[* blackred] Remove all screws from all four arms, and the screws on either side of the centercenter.
[* icon_note] The screws on the rotors will be 9mm, and the screws on the arms will be 7mm.

[* black] Remove the 5mm screw holding the rotor onto the dronedrone.
[* icon_note] '''Note''' There should be 22x 7 mm Phillips head screws, 8x 9 mm Phillips head screws and 1x 5 mm Phillips head screwscrew.
[* blackred] Remove all screws from all four arms, and the screws on either side of the centercenter.
[* icon_note] The screws on the rotors will be 9mm, and the screws on the arms will be 7mm.

[* black] Remove the 5mm screw holding the rotor onto the dronedrone.
[* icon_note] '''Note''' There should be 22x 7 mm Phillips head screws, 8x 9 mm Phillips head screws and 1x 5 mm Phillips head screwscrew.