Modifiche al passo #7
Modifica in base a Walter Galan-
Modifica approvata da Walter Galan
- Prima di
- Dopo il
- Invariato
Righe Passo
[* icon_note] If necessary, use a heat gun to reapply heat along the top right edge to loosen the adhesive securing the bezel to the display assembly. |
[* black] Work along the top right edge of the display assembly, carefully prying the adhesive up with the guitar pick. Stop when you get to the iSight camera. |
[* icon_caution] Do not pry near the iSight camera—there is no adhesive immediately surrounding it, and you could damage the camera with the guitar pick. |