Salta al contenuto principale

Aggiusta la tua roba

Diritto alla Riparazione

Store

Modifiche al passo #5

Modifica in base a Walter Galan-

Modifica approvata da Walter Galan

Prima di
Dopo il
Invariato

Righe Passo

[* blackicon_note] In the following steps, you will use a heat gun to soften the adhesive securing the outer silver border around the underside of the front panel to the display.
[* blackicon_note] In the following steps, you will use a heat gun to soften the adhesive securing the outer silver border around the underside of the front panel to the display.
[* black] With the heat gun set to low, start by heating the metal bezel surrounding the LCD.
[* icon_caution] When using the heat gun, the goal is to soften a layer of adhesive holding the bezel to the display assembly. Be very careful not to overheat the LCD, as it could cause permanent damage.