Salta al contenuto principale

Modifiche al passo #1

Modifica in base a Zackery-

Modifica approvata da Zackery

Eliminato
Aggiunto
Invariato

Righe Passo

[* black] Gently flipFlip the motherboard with the heatsink up side down.
[* icon_caution] Beware of over heatingover heating, the soldering kit will damage the logic board.
[* orange] Heat upUse the soldering iron. When it is hot enough, place it on top of the outlined soldersiron to melt them off desolder the four solder joints and remove the melted solder with the pump shown in step 8.
[* black] Gently flipFlip the motherboard with the heatsink up side down.
[* icon_caution] Beware of over heatingover heating, the soldering kit will damage the logic board.
[* orange] Heat upUse the soldering iron. When it is hot enough, place it on top of the outlined soldersiron to melt them off desolder the four solder joints and remove the melted solder with the pump shown in step 8.