Salta al contenuto principale

Modifiche al passo #1

Modifica in base a Tuong Ngo-

Modifica approvata da Tuong Ngo

Eliminato
Aggiunto
Invariato

Righe Passo

[* light_bluered] Locate the battery charging port on the motherboard.
[* light_bluered] Locate the battery charging port on the motherboard.
[* black] Gently flip the motherboard with the heatsink up side down.
[* icon_caution] Beware of over heating the soldering kit will damage the logic board.
[* violetorange] Heat up the soldering tip. When it is hot enough, place it on top of the arrowed points to melt them off.
[* violetorange] Heat up the soldering tip. When it is hot enough, place it on top of the arrowed points to melt them off.

Immagine 1

Vecchia Versione

Nuova Versione

Immagine 3

Vecchia Versione

Nuova Versione