Salta al contenuto principale

Modifiche al passo #10

Modifica in base a Marty Rippens-

Modifica approvata da Marty Rippens

Eliminato
Aggiunto
Invariato

Righe Passo

[* black] Secure your wood piece (tread) into place using a drill and galvanized screws.
[* red] Create three pilot holes with the correct drill bit.
[* orange] Secure the wood (tread) into place by drilling 2" galvanized phillip'sPhillips head screws into the pilot holes.
[* orange] Secure the wood (tread) into place by drilling 2" galvanized phillip'sPhillips head screws into the pilot holes.