Salta al contenuto principale

Modifiche al passo #3

Modifica in base a Maximillian McDonald-

Modifica approvata da Maximillian McDonald

Eliminato
Aggiunto
Invariato

Righe Passo

[* black] Turn device right side up and open lid.
[* black] Insert spudger in seem between keyboard plate and base of laptop.
[* black] Run spudger along seem, prying up as you go.
[* black] Separate keyboard plate from base, lifting from the front.
[* icon_caution] There are 3 ribbon cables connecting the keyboard plate to the base, lifting the keyboard plate too high without disconnecting the ribbon cables may damage the connectors.
[* black] Disconnect the black, white, and copper ribbon cables using the plastic opening tool.
[* black] Completely remove the keyboard plate.

Immagine 1

Nessuna immagine precedente.

Aggiunto

Immagine 2

Nessuna immagine precedente.

Aggiunto

Immagine 3

Nessuna immagine precedente.

Aggiunto