Salta al contenuto principale

Modifiche al passo #3

Modifica in base a Maximillian McDonald-

Modifica approvata da Maximillian McDonald


Righe Passo

[* black] Turn the device right side up and open the lid.
[* black] Insert the spudger in seem between the keyboard plate and the base of laptop.
[* black] Run the spudger along seem, prying up as you go.
[* black] Separate the keyboard plate from the base, lifting from the front.
[* icon_caution] There are 3 ribbon cables connecting the keyboard plate to the base. Lifting the keyboard plate too high without disconnecting the ribbon cables may damage the connectors.
[* black] Disconnect the 3 (black, white, and copper color) ribbon cables using the plastic opening tool by prying up the latches holding each cable in place.
[* black] Completely remove the keyboard plate.

Immagine 3