Salta al contenuto principale

Modifiche a questo Step

Modifica in base a Brandon Munson-

Modifica approvata da Brandon Munson

Eliminato
Aggiunto
Invariato

Righe Passo

[* icon_note] This is Figure 1.
[* black] Take the back cover and place it back over the PC.
[* red] Locate the 10 bolts on the magnetic mat and screw them back in to their correct places (Refer to Figure 1, 10 are identified with red circles).
[* blue] Locate the 4 bolts and screw them back into their correct location (Refer to Figure 1, 4 bolts are identified with blue circles).
[* black] Turn the PC over to the correct position of operation and test the PC by turning it on.

Immagine 1

Nessuna immagine precedente.

Aggiunto