Salta al contenuto principale

Modifiche a questo Step

Modifica in base a Brandon Munson-

Modifica approvata da Brandon Munson

Eliminato
Aggiunto
Invariato

Righe Passo

[* icon_note] This is Figure 1.
[* black] Take the back cover and place it back over the PC.
[* red] LocateScrew the 10 bolts onback into the magnetic mat and screw them back in to their correct places (Refer to Figure 1, 10 are identifiedcover. (Identified with red circles).the Red Circles)
[* blueorange] Locate the 4 bolts and screw them back into their correct location (Refer to Figure 1, 4 bolts are identified with blueorange circles).
[* red] LocateScrew the 10 bolts onback into the magnetic mat and screw them back in to their correct places (Refer to Figure 1, 10 are identifiedcover. (Identified with red circles).the Red Circles)
[* blueorange] Locate the 4 bolts and screw them back into their correct location (Refer to Figure 1, 4 bolts are identified with blueorange circles).
[* black] Turn the PC over to the correct position of operation and test the PC by turning it on.

Immagine 1

Vecchia Versione

Nuova Versione