Salta al contenuto principale

Modifiche a questo Step

Modifica in base a Justin Ogihara-

Modifica approvata da Justin Ogihara

Eliminato
Aggiunto
Invariato

Righe Passo

[* icon_note] This photo is Figure 1.
[*
red] Start by turningTurn the computer to theon its backside and unscrewing the 10 bolts that are identified with red circles in Figure 1. (Use the 64 bit driver andunscrew the fourteen screws using a Phillips Head (PH 0) for all exterior screws).
[* orange] Unscrew the 4 bolts identified with orange circles in Figure 1
#0 screwdriver.
[* icon_note] This photo is Figure 1.
[*
red] Start by turningTurn the computer to theon its backside and unscrewing the 10 bolts that are identified with red circles in Figure 1. (Use the 64 bit driver andunscrew the fourteen screws using a Phillips Head (PH 0) for all exterior screws).
[* orange] Unscrew the 4 bolts identified with orange circles in Figure 1
#0 screwdriver.
[* black] Use the blue Opening Tool to pry-open the back cover.
[* black] Insert another Opening Tool in the gap between the cover and PC
[* black] Slide it around the perimeter of the PC freeing the back cover and remove the back cover.

Immagine 1

Vecchia Versione

Nuova Versione