Salta al contenuto principale

Modifiche al passo #1

Modifica in base a Jake Park-

Modifica approvata da Jake Park

Eliminato
Aggiunto
Invariato

Righe Passo

[* black] Push the hook that is attached to the encoder strip towards the center of the printer.
[* black]
Hold the hook pushed in and pull the strip off of the hook.
[* black] Push the hook that is attached to the encoder strip towards the center of the printer.
[* black]
Hold the hook pushed in and pull the strip off of the hook.
[* black] Repeat on the other side of the encoder strip.
[* icon_reminder] During reassembly, the black triangle on the encoder strip should be on the right side of the printer.