Salta al contenuto principale

Aggiusta la tua roba

Diritto alla Riparazione

Componenti & Strumenti

Modifiche al passo #5

Modifica in base a Miroslav Djuric-

In attesa di approvazione

Eliminato
Aggiunto
Invariato

Righe Passo

[* red] Remove the four 3.4 mm Phillips screws from the DVI connector side of the PowerBook.
[* icon_reminder] When replacing these screws, you must reinstall each screw in the correct order. Begin by installing the screw closest to the display hinge, and go out from there.
[* icon_note] During reassembly, do not reinstallmake sure to reinstall the two screws on the right into their appropriate locations, and not the DVI port anchor holes.
[* icon_note] During reassembly, do not reinstallmake sure to reinstall the two screws on the right into their appropriate locations, and not the DVI port anchor holes.