Modifiche al passo #2
Modifica di Travers Edwards —
Modifica approvata da Lexa Hall
- Prima di
- Dopo il
- Invariato
Righe Passo
| - | [* black] |
|---|---|
| + | [* black] Place the prying tool beneath the 4 wires on the end of the connector and gently pry the speaker cable connector straight up from its socket on the logic board. ++Do not pry from the opposite end of the connector as this will break the 4 solder points on the underside of the socket and will require a microsolder repair.++ |