Salta al contenuto principale

Modifiche al passo #2

Modifica in base a Taylor Dixon-

Modifica approvata da Taylor Dixon

Eliminato
Aggiunto
Invariato

Righe Passo

[title] Screw thread contact and LED controller
[* black] Start withby carefully removing the remaining broken glass parts onfrom the Philips Hue lightbulb. On this example, glass parts were removed previouslyhave already been removed.
[* black] UseThen use your Groove Joint Pliers to gently crush and remove the screw thread contact fromof the IKEA lightbulb.
[* black] Start withby carefully removing the remaining broken glass parts onfrom the Philips Hue lightbulb. On this example, glass parts were removed previouslyhave already been removed.
[* black] UseThen use your Groove Joint Pliers to gently crush and remove the screw thread contact fromof the IKEA lightbulb.
[* black] Once removed, you'll be able to extract the LED controller using your fingers. You might have to use a pliers again.