Salta al contenuto principale

Modifiche al passo #5

Modifica in base a Andrew Bookholt-

In attesa di approvazione

Eliminato
Aggiunto
Invariato

Righe Passo

[* black] Repeat the previous steps 1-3 to separate the right side of the rear display bezel from the display.
[* black] Repeat the previous steps 1-3 to separate the right side of the rear display bezel from the display.
[* black] Use your spudger to pry the plastic retaining clips on the rear display bezel over the raised aluminum tabs on the front display bezel.
[* black] At this point, the clips on the left and right edges of the rear display bezel should be free from the raised aluminum tabs on the front display bezel. If they are not, use a spudger to pry them past the front display bezel.