Salta al contenuto principale

Modifiche al passo #10

Modifica in base a QuikTroniks-

Modifica approvata da Jake Devincenzi

Eliminato
Aggiunto
Invariato

Righe Passo

[* black] Remove the microphone and earphone flex ribbon by lifting the black piece of the connector upwards.
[* black] To remove the display flex cable, there's a clear tape you'll have to clear away first,first (but do not disturb the yellow tape) then carefully displace the connectorconnector by pushing back against the two white lips of the cable to remove.
[* black] To remove the display flex cable, there's a clear tape you'll have to clear away first,first (but do not disturb the yellow tape) then carefully displace the connectorconnector by pushing back against the two white lips of the cable to remove.
[* black] Disconnect the speaker connector in the same way.