Salta al contenuto principale

Modifiche al passo #7

Modifica in base a spanish210-

Modifica approvata da Geoff Wacker

Eliminato
Aggiunto
Invariato

Righe Passo

[* green] Take a small flat screwdriver and displace the 45 tabs holding the keyboard one by one. Start on the right end and push the tabs in towards the screen as you lift the keyboard up.
[* green] Take a small flat screwdriver and displace the 45 tabs holding the keyboard one by one. Start on the right end and push the tabs in towards the screen as you lift the keyboard up.
[* black] Lift the keyboard being careful with the flex cable.
[* black] Release the keyboard ribbon from the motherboard by carefully sliding the black plastic part of the connector to the right.