Salta al contenuto principale

Modifiche al passo #7

Modifica in base a joebn612-

Modifica approvata da David Hodson

Eliminato
Aggiunto
Invariato

Righe Passo

[* black] Take a small flat screwdriver and displace the 4 tabs holding the keyboard one by one. Start on the right end and push the tabs in towards the screen as you lift the keyboard up.
[* black] Take a small flat screwdriver and displace the 4 tabs holding the keyboard one by one. Start on the right end and push the tabs in towards the screen as you lift the keyboard up.
[* black] Lift the keyboard being careful with the flex cable.
[* black] Release the keyboard ribbon from the motherboard by carefully sliding the black plastic part of the connector to the right.