Salta al contenuto principale

Modifiche al passo #3

Modifica in base a Marty Rippens-

Modifica approvata da Marty Rippens

Eliminato
Aggiunto
Invariato

Righe Passo

[* red] Use a PH0 tool bitPhillips #0 screwdriver to loosen the four 6.5 mm screws.
[* red] Use a PH0 tool bitPhillips #0 screwdriver to loosen the four 6.5 mm screws.
[* icon_note] Do not fully remove the screws, just enough to be unattached from the motherboard.
[* orange] Use a JIS J1 bit#1 screwdriver to remove the two 7.7 mm screws.
[* orange] Use a JIS J1 bit#1 screwdriver to remove the two 7.7 mm screws.