Salta al contenuto principale

Modifiche al passo #3

Modifica in base a Brais Galvan-

Modifica approvata da Brais Galvan

Eliminato
Aggiunto
Invariato

Righe Passo

[* red] Use a PH0 tool bit to loosen the four 6.5 mm screws.
[* icon_note] Do not fully remove them, remove the screwsscrews, just enough to be unattached from the motherboard motherboard.
[* icon_note] Do not fully remove them, remove the screwsscrews, just enough to be unattached from the motherboard motherboard.
[* orange] Use a JIS J1 bit to remove the two 7.7 mm screws.