Salta al contenuto principale

Modifiche al passo #1

Modifica in base a Darrin Smiley-

Modifica approvata da Darrin Smiley


Righe Passo

[* black] Carefully, pull back the locking clip of the connector (attaching the touchpad to motherboard) using a plastic opening tool and disconnect cable.
[* red] Using a PH0 bit remove the 7 (2.8 mm) screws securing the touchpad to the device.
[* icon_note] Keep the cable from interfering with the touchpad removal.
[* black] Use a plastic opening tool to pry up the touchpad.