Salta al contenuto principale

Modifiche al passo #1

Modifica in base a Darrin Smiley-

Modifica approvata da Darrin Smiley

Eliminato
Aggiunto
Invariato

Righe Passo

[* black] Carefully, pull back the locking clip of the connector (attaching the touchpad to motherboard) using a plastic opening tool and disconnect cable.
[* icon_note] The red square contains two screws side by side.
[* black] Carefully, pull back the locking clip of the connector (attaching the touchpad to motherboard) using a plastic opening tool and disconnect cable.
[* icon_note] The red square contains two screws side by side.
[* red] Using a PH0 bit remove the 7 (2.8 mm) screws securing the touchpad to the device.
[* icon_note] Keep the cable from interfering with the touchpad removal.

Immagine 2

Vecchia Versione

Nuova Versione

Immagine 3

Vecchia Versione

Nuova Versione