Salta al contenuto principale

Modifiche al passo #10

Modifica in base a Justin Ogihara-

Modifica approvata da Justin Ogihara

Eliminato
Aggiunto
Invariato

Righe Passo

[* red] Using a pry toolmetal spudger or a prying tool, gently push forward to separate the cover from the speaker.
[* red] Using a pry toolmetal spudger or a prying tool, gently push forward to separate the cover from the speaker.
[* orange] After lifting the cover, you will see two ribbons attaching the cover to the speaker. Gently remove these ribbons by pulling straight down.