Salta al contenuto principale

Modifiche al passo #1

Modifica in base a Chris D-

Modifica approvata da Chris D

Eliminato
Aggiunto
Invariato

Righe Passo

[* redicon_caution] Before you proceed, make sure your computer is turned off and it's not connected to any power source.
[* redicon_caution] Before you proceed, make sure your computer is turned off and it's not connected to any power source.
[* red] Using #1 Phillips screwdriver remove the 13 (9mmx6mm) screws holding the back.
[* black] Gently pry the back off using a plastic opening tool, starting from one of the corners.