Salta al contenuto principale

Modifiche al passo #2

Modifica in base a Marty Rippens-

Modifica approvata da Marty Rippens

Eliminato
Aggiunto
Invariato

Righe Passo

[* black] Use the plastic opening tool to separate the back panel from the rest of the laptop.
[* black] Pry along all four sides and corners.
[* black] Slowly separate the back panel from the keyboard panel.
[* icon_caution] Do not completely remove the back panel. It is still connected to the keyboard panel by a pair of ribbon cable. Carefully disconnect the cable from the green motherboardcables.
[* icon_caution] Do not completely remove the back panel. It is still connected to the keyboard panel by a pair of ribbon cable. Carefully disconnect the cable from the green motherboardcables.