Salta al contenuto principale

Modifiche al passo #2

Modifica in base a Austin Blakely-

Modifica approvata da Austin Blakely

Eliminato
Aggiunto
Invariato

Righe Passo

[* black] Use the plastic opening tool to separate the back panel from the rest ofOpen the laptop.
[* black] PryUsing an iFixit opening tool, pry along all four sides and corners.
[* black] Slowly separate
the back panel fromedges of the keyboard panelkeyboard.
[* icon_caution] Do not completely remove the back panelkeyboard. It is still connected to the keyboardback panel by a pair of ribbon cables.
[* black] Use the plastic opening tool to separate the back panel from the rest ofOpen the laptop.
[* black] PryUsing an iFixit opening tool, pry along all four sides and corners.
[* black] Slowly separate
the back panel fromedges of the keyboard panelkeyboard.
[* icon_caution] Do not completely remove the back panelkeyboard. It is still connected to the keyboardback panel by a pair of ribbon cables.

Immagine 1

Vecchia Versione

Nuova Versione

Immagine 2

Nessuna immagine precedente.

Aggiunto