Salta al contenuto principale

Modifiche al passo #4

Modifica in base a Kristen Gismondi-

Modifica approvata da Kristen Gismondi

Eliminato
Aggiunto
Invariato

Righe Passo

[* black] Use the spudger to lift the motherboard up and remove it from the laptop, then flip the now separated motherboard overover.
[* red] Using tweezers, disconnect the red wire circled in the picture; where the hard drive would bebe.
[* violetorange] Locate the SSD and the screw holding it inin.
[* black] Unscrew the one Screw using a #1 Phillips Head screwdriverscrewdriver.
[* black] The SSD will want to lift with that screw being removed, from here grab it and pull it out gentlygently.
[* black] Use the spudger to lift the motherboard up and remove it from the laptop, then flip the now separated motherboard overover.
[* red] Using tweezers, disconnect the red wire circled in the picture; where the hard drive would bebe.
[* violetorange] Locate the SSD and the screw holding it inin.
[* black] Unscrew the one Screw using a #1 Phillips Head screwdriverscrewdriver.
[* black] The SSD will want to lift with that screw being removed, from here grab it and pull it out gentlygently.

Immagine 2

Vecchia Versione

Nuova Versione