Salta al contenuto principale

Modifiche al passo #4

Modifica in base a Nicholas Perry-

Modifica approvata da Nicholas Perry

Eliminato
Aggiunto
Invariato

Righe Passo

[* black] Use the spudger to help lift the Motherboard up and out of the LaptopLaptop, next flip the Motherboard.
[* black] After lifting the Motherboard there is one more wire attached it is located in the first picture in the red circle after the Motherboard is lifted gently follow the steps you used on the speakers and remove it
.
[* black] Next locate the SSDSSD, and the screw holding it in.
[* black] Use the spudger to help lift the Motherboard up and out of the LaptopLaptop, next flip the Motherboard.
[* black] After lifting the Motherboard there is one more wire attached it is located in the first picture in the red circle after the Motherboard is lifted gently follow the steps you used on the speakers and remove it
.
[* black] Next locate the SSDSSD, and the screw holding it in.
[* black] Unscrew its one Screw using the #1 Phillips Head screwdriver.
[* black] The SSD should naturally on its on lift and then grab it as shown and pull it out.

Immagine 1

Nessuna immagine precedente.

Aggiunto

Immagine 2

Nessuna immagine precedente.

Aggiunto

Immagine 3

Nessuna immagine precedente.

Aggiunto