Salta al contenuto principale

Modifiche al passo #1

Modifica in base a Nicholas Perry-

Modifica approvata da Nicholas Perry


Righe Passo

[* black] First locate both speakers.
[* black] Use the tweezers or your finger to lift the speaker from its position.
[* black] Then grab the multi-colored wire with the tweezers and gently pull back until the speakers releases from its socket.
[* icon_note] Copy these two steps for both speakers.
[* icon_caution] Remember to keep track of which speaker goes where they have different colored wiring and are different and won't go back into place if you don't.