Skip to main content

Modifiche al passo #1

Modifica in base a Chris Gifford-

Modifica approvata da Chris Gifford

Eliminato
Aggiunto
Invariato

Righe Passo

[* blackred] First locate both speakersthe speaker(s).
[* black] Use the tweezers or your finger to lift the speaker from its position.
[* black] Then grabGrab the multi-colored wire with the tweezers and gently pull back until the speakers releases from its socket.
[* icon_note] Copy these two stepsApplies for both speakers.speakers
[* icon_caution] Remember to keep track of which speaker goes where they have different colored wiring andwent where. The connectors for the speakers are different and won't go back into place ifunique, meaning you don'tcannot use a speaker that should go on the right side on the left side, and vice versa.
[* blackred] First locate both speakersthe speaker(s).
[* black] Use the tweezers or your finger to lift the speaker from its position.
[* black] Then grabGrab the multi-colored wire with the tweezers and gently pull back until the speakers releases from its socket.
[* icon_note] Copy these two stepsApplies for both speakers.speakers
[* icon_caution] Remember to keep track of which speaker goes where they have different colored wiring andwent where. The connectors for the speakers are different and won't go back into place ifunique, meaning you don'tcannot use a speaker that should go on the right side on the left side, and vice versa.

Immagine 1

Vecchia Versione

Nuova Versione

Immagine 2

Vecchia Versione

Nuova Versione

Immagine 3

Nessuna immagine precedente

Aggiunto