Modifiche al passo #3
Modifica di Flora Peterson —
Modifica approvata da Flora Peterson
- Prima di
- Dopo il
- Invariato
Righe Passo
| [* red] Locate the white and brown wiring that connects to the digitizer and the screen. | |
| [* black] Cut through clear part of tape attached to the brown latch and white wiring. | |
| - | [* black] Disconnect the wiring, by lifting the brown latch with the blue opening tool and pulling the white wire at the same time. |
| + | [* black] Disconnect the wiring, by lifting the brown latch with the blue plastic opening tool and pulling the white wire at the same time. |
| [* black] Lift off digitizer. If you need to replace the digitizer stop here and replace this part | |
| [* black] If you need to replace the screen then continue. |