Salta al contenuto principale

Aggiusta la tua roba

Diritto alla Riparazione

Store

Modifiche al passo #3

Modifica in base a Kokeb Gebre-

Modifica approvata da Kokeb Gebre

Prima di
Dopo il
Invariato

Righe Passo

[* red] Remove the internal electronic mechanism from the housing by prying the red clips shown in the figure. This removes the charging port.
[* icon_caution]
Be very careful not to damage the charging port during this step. Other wise you will have to solder this part back to the device as shown in the second figure.
[* red] Remove the internal electronic mechanism from the housing by prying the red clips shown in the figure. This removes the charging port.
[* icon_caution]
Be very careful not to damage the charging port during this step. Other wise you will have to solder this part back to the device as shown in the second figure.

Immagine 1

Vecchia Versione

Nuova Versione

Immagine 2

Vecchia Versione

Nuova Versione