Salta al contenuto principale

Modifiche al passo #4

Modifica in base a iRobot-

In attesa di approvazione


Righe Passo

[* black] Grasp the upper case near the back left corner and lift up partly so that you can access and disconnect the audio in/out cable from the sound card in the upper right corner of the case.
[* icon_caution] Be careful not to lift the upper casing too far before you have disconnected the audio in/out cable.
[* black] Remove the upper casing. Note that there are two tabs on the laptop's front that often cause the upper case to stick.

Immagine 1

Nessuna immagine precedente.