Salta al contenuto principale

Cambiamenti ad Microsoft Surface Pro 5 Heat Sink Replacement Introduzione

Modifica in base a Kaden Foster-

Modifica approvata da Kaden Foster

Prima di
Dopo il
Invariato
Introduction
This guide will go over how to remove the heat sink on the Microsoft Surface Pro 5. Removal of the heat sink will be necessary to provide ease of access for many of the components within the Surface Pro 5. It is identified by the four prominent copper bars that span the interior of the device, converging over the CPU. The iOpener is used in this guide, but a hair dryer or heat gun could also be used. See instructions for the iOpener [https://www.ifixit.com/Guide/iOpener+Instructions/11677|here].