Salta al contenuto principale

Cambiamenti ad Fujifilm Instax Mini 8 Flash Unit Replacement Introduzione

Modifica in base a Richard-

Modifica approvata da Richard

Prima di
Dopo il
Invariato
Introduction
The main purpose of this page is to assure the owner of a Fujifilm Instax Mini 8 is capable of disassembling the camera in order to remove and replace the Flash Unit, if there was to ever be any problems with the flash. Before attempting repairs, please take note of certain risks of receiving shock from the camera's flash capacitor. Also make sure to ground yourself before operating on the camera's motherboard or you might discharge static to crucial components.
The main purpose of this page is to assure the owner of a Fujifilm Instax Mini 8 is capable of disassembling the camera in order to remove and replace the Flash Unit, if there was to ever be any problems with the flash. Before attempting repairs, please take note of certain risks of receiving shock from the camera's flash capacitor. Also make sure to ground yourself before operating on the camera's motherboard or you might discharge static to crucial components.
Summary
TestThis guide helps you recognize the steps to replace your camera's flash unit to attain better-lit photos on an Instax Mini 8.
TestThis guide helps you recognize the steps to replace your camera's flash unit to attain better-lit photos on an Instax Mini 8.

Strumenti

  • Phillips #00 Screwdriver x1 added.
  • Soldering Workstation x1 added.
  • No 0 Philips Head Screwdriver x1 removed.