Salta al contenuto principale

Cambiamenti ad Sony MDR-1000X Battery Replacement Introduzione

Modifica in base a Dominik Schnabelrauch-

Modifica approvata da Dominik Schnabelrauch

Prima di
Dopo il
Invariato
Dispositivo
Sony MDR-1000X
Type
replacement
Thing
Battery
Title
Sony MDR-1000X Battery Replacement
Introduction
Use this guide to replace a worn out or dead battery in your Sony MDR-1000X.
If your battery is swollen, [[What to do with a swollen battery|take appropriate precautions|new_window=true]]. For your safety, ***discharge your battery below 25%*** before disassembling your headphones. This reduces the risk of a dangerous thermal event if the battery is accidentally damaged during the repair.
Time Required Min
20 minuti
Time Required Max
45 minuti
Imageid
Prima di
Dopo il
Difficulty
Moderate
Conclusion
If possible, turn on your device and test your repair before resealing.
To reassemble your device, follow these instructions in reverse order.
For optimal performance, ***[[Battery Calibration|calibrate]] your newly installed battery***: Charge it to 100%, and keep charging it for at least two more hours. Then, use it until it shuts off due to low battery. Finally, charge it uninterrupted to 100%
Take your e-waste to an [[E-Waste|R2 or e-Stewards certified recycler|new_window=true]].
Repair didn’t go as planned? Check out our [link|https://www.ifixit.com/Answers/Device/Sony%20MDR-1000X|Answers community] for troubleshooting help.
Author
Public
No
Summary
How to replace a worn-out or dead battery in your Sony MDR-1000X.

Prerequisiti Guida

Strumenti

  • Phillips #00 Screwdriver x1 added.
  • Spudger x1 added.
  • iFixit Opening Picks (Set of 6) x1 added.

Contrassegni

  • In Progress added.
  • Featured Guide added.

Passi

Step #: 1
Prima di
Dopo il