Salta al contenuto principale

Cambiamenti ad ZTE Blade X Max LCD Replacement Introduzione

Modifica in base a Celeste Holmes-

Modifica approvata da Celeste Holmes

Prima di
Dopo il
Invariato
Introduction
''When opening the back of the phone, be cautious. The fingerprint scanner is connected by a very thin film and will break if pulled roughly.''
If your ZTE Blade X Max LCD is damaged—dark spots, cracks, unresponsive to touch—and you have already finished troubleshooting (insert link here), then you may need to replace it.
'''''To remove the LCD you will have to remove the motherboard. Be aware that if the motherboard is damaged, your device may lose all function.'''''
This guide requires removing the back of the phone, which is not meant to be removed by the consumer. You will have to use heating products to complete this guide. If you are using the iFixit iOpener, or a heating pad, be sure to follow the instructions for that particular product.
'''''Be cautious. The battery is a lithium-ion battery. Damage to the battery could result in injury.'''''
To remove the battery, you will have to heat it. Be sure not to overheat the battery. If you do, the battery will swell and be rendered useless.