Salta al contenuto principale

Cambiamenti ad iPad 5 LTE Front Panel Assembly Replacement Introduzione

Modifica in base a Tarun Thiruma-

Modifica approvata da Tarun Thiruma

Prima di
Dopo il
Invariato
Introduction
Use this guide to replace the front glass and digitizer assembly on an iPad 5 LTE.
'''Note''' that since the Touch ID sensor in the home button is paired to the logic board, this guide includes instructions for removing the home button. In order to retain Touch ID functionality, you need to transfer the original home button to the new front panel assembly.
Parts of this guide were shot with a Wi-Fi model and as such the internals may look slightly different from the LTE model. The procedure is the same for both models except where noted.
'''Warning: the battery isolation method in this guide is outdated, and may result in irreversible damage to the battery pins of the logic board, effectively destroying it. If you choose to isolate the battery this way, heed all warnings and work extremely carefully. If you choose to complete the guide without isolating the battery, avoid using metal tools except when completely necessary (like when removing screws) to prevent shorting the battery and damaging sensitive circuit components.'''