Salta al contenuto principale

Cambiamenti ad Fujifilm X20 Disassembly and sand removal Introduzione

Modifica in base a Claire Rapp-

Modifica approvata da Claire Rapp

Eliminato
Aggiunto
Invariato
Dispositivo
[ ]Fujifilm X20
Type
[ ]disassembly
Title
[ ]Fujifilm X20 Disassembly and sand removal
Time Required Min
2 ore
Time Required Max
2 ore
Difficulty
Difficult
Conclusion
[ ]To reassemble your device, follow these instructions in reverse order. Please pay attention to the following steps: -On the PCB with the big capacitor you have to push the FPC in. There is no lever on the socket. - On all other sockets, open the lever first, slide in the FPC and close the socket. - Be careful with the thick wires going to the flash, They may keep keep the flash from opening. Try this out before closing the camera. - Don't forget so secure the beeper and his wire. - Also remember to glue on the copper foil.
Author
Public
Summary
[ ]These instructions will show how to disassemble the Fujifilm X20.

Strumenti

  • T1 Torx Screwdriver x1 added.
  • Small Phillips Head Screwdriver x1 added.
  • Tweezers x1 added.

Contrassegni

  • Member-Contributed Guide added.