Salta al contenuto principale

d.light Solar Lantern S2 Battery Replacement

Cosa ti serve

  1. d.light Solar Lantern S2 Battery Replacement, Battery: passo 1, immagine 1 di 2 d.light Solar Lantern S2 Battery Replacement, Battery: passo 1, immagine 2 di 2
    • To remove the lens, three T15 x 12.5mm screws must be removed by a T15 head screwdriver.

    • The location of the other two screws are marked in red.

  2. d.light Solar Lantern S2 Battery Replacement: passo 2, immagine 1 di 3 d.light Solar Lantern S2 Battery Replacement: passo 2, immagine 2 di 3 d.light Solar Lantern S2 Battery Replacement: passo 2, immagine 3 di 3
    • After the lens has been removed the back cover needs to be removed. There are no snaps or screws holding it in place.

  3. d.light Solar Lantern S2 Battery Replacement: passo 3, immagine 1 di 3 d.light Solar Lantern S2 Battery Replacement: passo 3, immagine 2 di 3 d.light Solar Lantern S2 Battery Replacement: passo 3, immagine 3 di 3
    • Take the battery out of its setting. It is only held in by friction (no snaps or screws).

    • Disconnect the battery by unpluging the white connector.

    • Install the new battery

Conclusione

To reassemble your device, follow these instructions in reverse order.

Altre 4 persone hanno completato questa guida.

Team

IUPUI, Team S2-G3, Harley Fall 2017 Membro di IUPUI, Team S2-G3, Harley Fall 2017

IUPUI-HARLEY-F17S2G3

3 Membri

3 Guide realizzate

Un commento

thanks for this.

You didn’t mention the model/name of the battery replacement. Can you help with that?

Albert H - Replica

Aggiungi Commento

Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 3

Ultimi 30 Giorni: 41

Tutti i Tempi: 2,040