Salta al contenuto principale
Aiuto

Palm Treo 700P Motherboard Replacement

Pallini!

Pallini!

Un migliore coordinamento tra i markup e il colore/tipo dei pallini aiuterà a rendere più chiara questa guida!

Necessarie Immagini Migliori

Necessarie Immagini Migliori

Delle foto più belle renderanno migliore questa guida. Contribuisci scattando, modificando o caricando immagini nuove!

Inconveniente Markup

Inconveniente Markup

Questa guida ha bisogno di markup migliori. Contribuisci correggendoli o con annotazioni sui markup.

Immagini Non Adeguate

Immagini Non Adeguate

Aggiornare le immagini per renderle più in sintonia con le prerequisite aumenterebbe l'attrattiva di questa guida.

This installation guide shows you how to access the motherboard of your Palm Treo 700P.

  • Autore: Ivan
  • Stima il tempo: 10 - 15 minuti
  • Difficoltà: Difficile

Follow this guide to gain access to your Treo's motherboard.

Sezioni

Passo 1 Motherboard  ¶ 

Using a plastic opening tool, gently edge your way between the back and border case (Picture 2) until they are completely separated (Picture 3). Using a plastic opening tool, gently edge your way between the back and border case (Picture 2) until they are completely separated (Picture 3). Using a plastic opening tool, gently edge your way between the back and border case (Picture 2) until they are completely separated (Picture 3).

Passo 1 Motherboard  ¶ 

  • Using a plastic opening tool, gently edge your way between the back and border case (Picture 2) until they are completely separated (Picture 3).

Passo 2  ¶ 

Remove the antenna chip by unscrewing the two screws with Torx T-5 screwdriver (Picture 1). Once unscrewed, gently detach the antenna chip with your hands (Picture 2). Once unscrewed, gently detach the antenna chip with your hands (Picture 2).

Passo 2  ¶ 

  • Remove the antenna chip by unscrewing the two screws with Torx T-5 screwdriver (Picture 1).

  • Once unscrewed, gently detach the antenna chip with your hands (Picture 2).

Passo 3  ¶ 

Use the plastic opening tool to unlock the tab holding the keyboard connection (Picture 1). Once the keyboard connection is detached, use your hands to gently separate the motherboard from the back panel (Picture 2).

Passo 3  ¶ 

  • Use the plastic opening tool to unlock the tab holding the keyboard connection (Picture 1).

  • Once the keyboard connection is detached, use your hands to gently separate the motherboard from the back panel (Picture 2).

Passo 4  ¶ 

To completely detach the motherboard from the back panel, use the plastic opening tool to unlock the LCD connection from the motherboard (Picture 2). Once the LCD connection is unlocked, the motherboard should now be completely detached from the back panel, keyboard, and LCD (Picture 3). Once the LCD connection is unlocked, the motherboard should now be completely detached from the back panel, keyboard, and LCD (Picture 3).

Passo 4  ¶ 

  • To completely detach the motherboard from the back panel, use the plastic opening tool to unlock the LCD connection from the motherboard (Picture 2).

  • Once the LCD connection is unlocked, the motherboard should now be completely detached from the back panel, keyboard, and LCD (Picture 3).